Parwan Electronics
Corporation


AudioSaver

Overview
Brochure
System Specifications
Purchasing AudioSaver


System Requirements

P4 3.0 GHz or Higher processor
Windows 2003 or higher
One GByte of RAM
250 GBytes or larger Hard Drive (Note: 10MB = 1 Hour of voice)
US Robotics Modem for Remote Support
VGA Port and VGA Monitor
10/100/1000 Network Port
Motherboard with at least 6 PCI Slots
Digital Voice Response Boards from Intel

System Specifications

Functional Capacity
Number of Ports 4-256
Hours of Message Storage Capacity Up to 12,000 hours
Number of Mailboxes Up to 10,000
Normal Operating Environment
Temperature 40 to 100 degrees F
Maximum Rate of Temperature Change 15 degrees F per hour
Humidity 20 to 80% non condensing
Altitude -1000 to 10,000 ft. ASL
External Power Supply Module 100-120 V 0.39 A 50-60Hz
Heat Dissipation 5,500 BTU per hour
Floor Loading 215.9 lbs/sq. ft.
Short-Term Environment
Temperature 35 to 120 degrees F
Humidity 20 to 80% non condensing
Altitude -1000 to 10,000 ft. ASL
Storage Environment
Temperature -40 to 140 degress F
Humidity 10 to 95% non condensing
Altitude -1000 to 40,000 ft ASL
Regulatory Approvals
Safety UL 1459, Second Edition/CSA / C222, No. 220
EMC FCC Part 15, Class A
Telecom FCC Part 68/DOC, CS-03
Data Communications RS232, Ethernet, TCP/IP
Signaling SMDI, In-band (MF & DTMF) / R1, R2MFC, ISDN PRI, SS5,  SS7, Q.Sig
Network Interfaces Ground Start Trunk, E & M Trunk, DID Trunk, T1,  E1, or VoIP

Updated on April 27, 2006